Wurth MS Hi Tack structural adhesive 290ml tubeApplication area
For bonding panels, wooden laths, windowsills, mirrors and insulating materials in the construction industry. For bodywork construction and metal connections. Bonds in ship building.

Instructions
The application surface must be clean, dry and free from grease. For optimum results, the application of special cleaning agents and a primer is recommended. The product is not suitable for PP, PE, Teflon or bitumen. Preferably apply vertical beads 30 cm apart. To permit adequate ventilation and flexibility, the adhesive must be at least 3 mm thick between the elements being joined.

Very high adhesive force
Can be used on numerous materials
Thanks to high initial adhesion, adhesion accessories are not normally required
Permanently elastic after hardening
Virtually odourless
Free of isocyanate